Humminbird ONIX Operating Manual page 132

Set Target Display Settings
In both AIS and MARPA, when a target is identified, it is displayed on the screen with an icon that indicates the target's safety status.
You can set defaults for how the targets will display on the screen.
1. Press the HOME key.
2. Select the Targets tool.
3. Select Settings > Target Settings.
COG Vector
Sleeping Target
(Speed)
Rate of Turn
Clear Lost Target
(Time)
AIS & MARPA
The COG Vector displays a line extending from the target that indicates the last known ship
speed. If you turn on Auto Show, the line is displayed when you select the target with the
cursor (see Track AIS Targets).
Use this menu to set the speed a target must reach for it to be identified as a sleeping target.
Use this menu to set the turning threshold for the rate of turn icon to be displayed. If the
threshold is met, the target's turn icon (port or starboard) will be displayed.
Use this menu to set the amount of time a target will remain on the view after it is identified
as a lost target.
132