Enabling Privacy Mode - Panasonic BL-C10A Operating Instructions Manual

Operating Instructions

2.16 Enabling Privacy Mode

Pressing the privacy button turns the camera into privacy mode. You can keep your
privacy in privacy mode. In this case, the camera operation stops, and the image
transfer by timer or sensor (see page 51 or page 58) is also stopped. The indicator
turns red, and viewers see a gray screen. Privacy mode can be controlled from a
mobile phone (see page 24) or a PC.
1.
Click [Privacy Mode] on the Setup page.
2.
Click [Save] when finished.
• Selecting [Enable] and clicking [Save] turn the camera into privacy mode.
Setting
Privacy Button
Privacy Mode
Notes
• To turn the camera into normal operation, press the privacy button on the
front of the camera (see page 6 in the Installation/Troubleshooting) during
privacy mode. Or click [Disable Privacy Mode] after you log in as an
administrator.
• If you log in as an administrator, you can disable privacy mode from your
mobile phone.
70
• Clearing the Enable box disables the privacy button on the
front of the camera.
• Selecting [Enable] and clicking [Save] turn the camera into
privacy mode.
Description