2.5
Encrypt the Camera Image in Transport Mode
The camera can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.
Click [IPsec] on the Setup page.
2.
Click Camera in the Transport column.
•
If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Set up these settings to transfer images in transport mode (see page 100).
3.
Enter each parameter in the data field.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
The display shows that
the communication is in
HTTP and any people can
access the camera if they
have the pre-shared key.
49