Using Setup Program - Panasonic BL-C10A Operating Instructions Manual

Operating Instructions
3.7

Using Setup Program

The Setup Program can be used for the following purposes.
• Finding the IP address and port number of the camera connected to your
network.
• Setting up the camera automatically.
• Setting up the camera manually to a Static or a DHCP setting.
• Displaying the Setup page.
Finding the camera
1.
Insert the Setup CD-ROM into the CD-ROM drive of your PC.
• If the Panasonic Network Camera Setup window does not appear, click
"setup.exe" on the Setup CD-ROM.
2.
Click [Camera Setup].
• You can find the camera IP address and port number by looking up the
MAC address of your camera.
Notes
• If you try to find multiple cameras, each MAC address beside the Ethernet
(LAN) port verifies which camera you are setting up.
• See page 12 in the Installation/Troubleshooting for the setup from the
MAC address.
90
MAC
Address
Port
No.
IP
Address
Displays version information about this
program.
Sets up the camera.
Displays the camera manuals.
If your PC does not have Adobe
Reader, install it from the Adobe Reader
website.
Closes the Setup Program.
Camera
Status
Acrobat
®
Camera
List window
®