Panasonic BL-C10A Operating Instructions Manual page 59

4.
Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 35).
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
Setting
A day of the
week
Active Time of
Trigger
5.
Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts
after the camera turns to the sensor position.
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
• Check the box to enable the day. Clear the box to disable
it.
• Select the [Always] option when you do not specify the
time period. If you specify the time period, select the time
period option and set the time period.
• Selecting [Sensor] enables the camera to buffer/transfer
the image by sensor.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
59