Panasonic BL-C10A Operating Instructions Manual page 27

Basic
(1) Network
(2) UPnP
(3) Viewnetcam.
com
(4) Date and Time
(5) Camera
Account
(6) Administrator
(7) General User
Advanced
(8) Image Display
(9) Multi-Camera
(10) Buffer/Transfer Sets image buffer or transfer by timer or sensor. (see page
(11) Operation Time Sets time period to display camera images (see page 67).
(12) Indicator
Control
(13) Privacy Mode
If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi-
*1
Camera Setup page] settings, changes will not be applied to the video (Motion JPEG)
viewers. Restart the camera to make changes applied to all video viewers.
Configures the network settings such as connection mode
to connect the camera to the network (see page 28).
Enables automatic port forwarding or shortcut to the
camera (see page 32).
Registers with the Viewnetcam.com service (see page 33).
Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page 35).
Sets camera name, white balance, AC power source
frequency and pan/tilt range (see page 37).
Sets authentication setting and administrator security (user
*1
name and password) (see page 41).
Sets general user security (user name and password) and
*1
general user's feature restriction (see page 45).
Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, limit continuous motion
JPEG , and language (see page 47).
*1
Sets the camera IP address or host name, camera name on
*1
the Multi-Camera page (maximum 12 cameras) (see page
49).
51 or page 58).
Sets indicator display (see page 69).
Enables privacy mode (see page 70).
[For assistance, please call: 1-800-272-7033]
Operating Instructions
27