Connecting The Camera To Your Network - Panasonic BL-C10A Operating Instructions Manual

Operating Instructions
2.2

Connecting the Camera to Your Network

The Network page offers three options to configure the camera.
• [Automatic Setup] automatically assigns an unused IP address to the camera,
and uses UPnP (Universal Plug and Play) to configure your router.
• [Static] allows the user to use a specific IP address.
• [DHCP] is offered for ISPs who require this option.
1.
Click [Network] on the Setup page.
2.
Select a connection mode.
• Each page is displayed (see page 28—page 29).
3.
Enter each parameter in the proper data field.
Automatic Setup
The camera automatically obtains the network settings (subnet mask, default
gateway and DNS server address) utilizing a DHCP feature on the router. The
camera also automatically searches the unused IP address on your network.
If you select [Yes] at the Allow Access from the Internet, the camera
automatically enables port forwarding by using UPnP. In this case, the camera
automatically searches the unused port number on your network in the order
from 50000 to 50050.
• Clicking [Cancel] takes you back to the previous page without saving
changes.
28
Normally sets Automatic Setup.
Uses a static IP address.
Uses ISP DHCP server function.