Konica Minolta Bizhub C252 Operation Manual page 58

4
4
On the network tab, click "SMB", and then click "Print" in the sub-
menu that appeared.
5
Specify settings for the following:
SMB Print: Set whether to use the SMB printing service. Select "ON"
here.
NetBIOS Name: Specify the NetBIOS name (up to 15 characters,
including - only).
Print Service Name: Specify the printing service name (up to 12
characters, excluding / \).
Work Group: Specify the work group name (up to 15 characters,
excluding " \ ; : , * < > | + = ?).
6
To apply the settings, restart this machine (turn it off, then on again).
– When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.
4-14
Setting up network printing
bizhub C252