Konica Minolta Bizhub C252 Operation Manual page 399

Various settings
Item
TCP/IP
Network Speed
IP Address Setting Method
IP Address
Subnet Mask
Default Gateway
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Dynamic DNS Setting
Host Name
DNS Domain Name Setting
DNS Server Setting
SLP Setting
LPD Setting
Note
To apply any changes to settings for the network tab, restart this machine
(turn the main power off, then on again).
When turning the power off, then on again, be sure to turn the sub-power
switch off first, then the main power switch. In addition, wait at least 10
seconds before turning the power on again; otherwise, this machine may
not function properly.
bizhub C252
Description
Specify whether to enable TCP/IP.
Select the operation speed.
Select when using a DHCP server.
Specify the IP address of this machine (format: "***.***.***.***", in-
put range for ***: 0—255).
Specify the subnet mask connecting to a network (format:
"***.***.***.***", input range for ***: 0—255).
Specify the default gateway address connecting to a network (for-
mat: "***.***.***.***", input range for ***: 0—255).
Specify the RAW port number (input range: 1—65535).
Specify whether to enable DNS.
Specify the host name (up to 63 characters).
Specify the domain name (up to 254 characters including the
characters for the host name).
Register a maximum of three DNS servers (format: "***.***.***.***",
input range for ***: 0—255).
Specify whether to enable SLP.
Specify whether to enable LPD.
11
11-107