Konica Minolta Bizhub C252 Operation Manual page 284

10
Note
The duplex printing function is available only when the optional auto
duplex unit is installed.
The staple function is available only when optional finisher FS-514,
FS-501, or FS-603 is installed. The number of staples that can be
selected may vary depending on the finisher that is installed. When
optional finish-er FS-501 is installed, specify "1 staple". When optional
finisher FS-514 or FS-603 is installed, specify "1 staple" or "2 staples".
The hole punch function is available only when optional finisher FS-514
and punch kit PK-510 are installed, or when optional finisher FS-603 and
punch kit PK-501 are installed.
The fold and staple function is available only when saddle sticher SD-503
is installed on optional finisher FS-514, or when optional finisher FS-603
is installed.
Do not specify the fold and staple function when Staple and Punch are
specified.
The fold and staple settings that can be specified may vary depending on
the finisher that is installed. When optional finisher FS-514 is installed,
you can specify "Fold & Staple" to fold and staple a document, "Center
Staple" to staple a document in the center, or "Fold" to fold a document
in half. When optional finisher FS-603 is installed, specify "Fold & Staple".
Specify "Center Erase" only when optional finisher FS-603 is installed.
10-20
Setting up the PPD driver (Mac OS X)
bizhub C252