Konica Minolta Bizhub C252 Operation Manual page 227

Setting up the PostScript driver (Windows)
Specifying settings
1
For Windows 2000/NT 4.0, click the [Start] button, point to "Settings",
and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the
Control Panel from the Start menu, select "Printers and Other
Hardware", and then select "Printers and Faxes".
2
Right-click the printer icon, and then click "Properties".
3
Click the option tab.
4
Select "Model" from the list, and then select the model to be used from
the "Setting" drop-down list.
5
Select the option, and then specify the installation status from the
drop-down list below.
Note
The installed option can be automatically registered in the "Option" list by
clicking the [Gather Option Information] button when connected to this
machine.
The [Gather Option Information] button can only be used when the SNMP
setting is enabled on this machine and the SNMP v1/v2c (IP) setting
check box is selected.
When the Mail Bin Kit is installed, you can assign output tray 1 and output
tray 2 as mail bins.
To assign the output destination of the mail bins, select "Bin Setting"
from "Administrator Setting"-"System Setting"-"Output Setting" on the
control panel.
bizhub C252
7
7-33