Konica Minolta Bizhub C252 Operation Manual page 137

Hide thumbs Also See for Bizhub C252:

Table of Contents

Setting up the PCL driver

If the paper size is other than the custom size, select the desired settings

after specifying the settings in Custom Size.

When "W" is selected for each standard paper size in the printer driver,

the data can be centered and printed.

For example, if A4 size data is created and you want to center and print

on A3 size paper, specify "A4 W" as the paper size in the printer driver

and specify "Tray 1" or "Bypass Tray" as the paper source.

To print, load A3 size paper in the tray ("Tray 1" or "Bypass Tray") of this

machine that is specified in the printer driver, and then specify the

settings described below from [Basic Screen (Paper)] — [Change Tray

Settings] — [Oversized Paper] on the control panel.

Select [A4W].

Enter the A3 paper size (420.0 × 297.0) in [Change Size].