Table of Contents
Advertisement
PARTS:
1.
Hanger assembly
2.
Extension assembly 9.
3.
Footplate
4.
Screw
5.
Extension tube
6.
Extension adjustment screw
7.
Tube end plug
TOOLS REQUIRED
No1 Philips screwdriver
Spanner 13mm
Flat bladed screwdriver
Mallet
INSPECTION
STEP 1
Check that the Footplate fits securely
and operates correctly.
STEP 2
Check the operation of the Footplate extension, clamping and adjustment bolt.
STEP 3
Check the footrest for damage
STEP 4
Check for damage and distortion to the footrest hanger paying particular attention to the
securing tabs that clamp the extension (welds, flanges etc).
DISMANTLING
STEP 1
Operate the quick release mechanism and detach the footrest assembly.
STEP 2
Remove the extension clamping screw with a 13mm spanner and detach the footrest
extension from its hanger.
STEP 3
Remove the bumper rubber screw and pull out the bumper rubber.
STEP 4
With a mallet, gently tap the footplate of the extension
To re-assemble reverse steps 1 to 4.
Phoenix
11/01
FOOT REST
8.
Angle Footrest Assembly
Tube Sub-Assembly
5
4
9
8
1
5
6
8
2
4
7
3
Advertisement
Table of Contents
