Invacare PHOENIX PLUS Service Manual page 28

Hide thumbs Also See for PHOENIX PLUS:

Table of Contents

Tools Required:

No1 Phillips Screwdriver

Flat Bladed Screwdriver

8mm Spanner

13mm Spanner

4mm Allen Key

INSPECTION

STEP 1

Check all tubing for misalignment, damage or bending of the frame or crossbar assembly.

STEP 2

Check that no misalignment is present at the castor mount area (castor fork and socket).

STEP 3

Check all brazed/welded joints for fractures or damage.

STEP 4

Check the crossbar assembly is not damaged (pivot bolt should not be over-tightened).

STEP 5

Check the paint or chrome finish for damage or peeling.

STEP 6

Check that the chair folds easily and that the crossbar pivots and folding mechanisms oper-

ate correctly.

FRAMES AND CHASSIS

DISMANTLING

STEP 1

Remove the arm rest assemblies and footrest

STEP 2

Unplug and remove the battery boxes, joystick assembly and control box (see pages 10,19)

STEP 3

Remove the back assembly complete by removing the two hand knobs and pulling the push

handles upwards.

STEP 4

Remove the seat upholstery (see page 2).

Phoenix

11/01

Table of Contents