Pods And Hr Sensors; Pairing Pods And Hr Sensors - Suunto AMBIT3 RUN 2.0 User Manual

3.22 PODs and HR sensors

Pair your Suunto Ambit3 Run with a Bluetooth® Smart compatible
foot to receive additional information during exercise.
The Suunto Smart Sensor included in your Suunto Ambit3 Run
package (optional) is already paired. Pairing is required only if you
want to use a different Bluetooth Smart compatible heart rate
sensor.

3.22.1 Pairing PODs and HR sensors

Pairing procedures may vary depending on the POD or heart rate
(HR) sensor type. Please refer to the user guide for the device you
are pairing with your Suunto Ambit3 Run before continuing.
To pair a POD or heart rate sensor:
1. Activate the POD or heart rate sensor.
If you are pairing a Suunto Smart Sensor, see
Suunto Smart Sensor .
2. Keep [Next] pressed to enter the options menu.
3. Scroll to PAIR with [Light Lock] and select with [Next].
4. Scroll the options with [Start Stop] and [Light Lock] and press
[Next] to select a POD or heart rate sensor to pair.
5. Hold your Suunto Ambit3 Run close to the device you are pairing
and wait for Suunto Ambit3 Runto notify that pairing was
successful.
If the pairing fails, press [Start Stop] to retry, or [Light Lock] to
return to the pairing setting.
3.9.2 Putting on
59