Table of Contents
Advertisement
Suunto Ambit3 Peak
4. Scroll through the notifications with [Start Stop] or [Light Lock] .
Up to 10 notifications can be listed. Notifications remain in your watch until you clear them
from your mobile device. However, notifications older than one day are hidden from view in
the watch.
3.24. PODs and HR sensors
Pair your Suunto Ambit3 Peak with Bluetooth
to receive additional information during exercise.You can pair up to five PODs at a time:
three bike PODs, these can be speed, distance and/or cadence bike PODs, but only one
•
can be connected at a time
one foot POD
•
one power POD
•
The Suunto Smart Sensor included in your Suunto Ambit3 Peak package (optional) is already
paired. Pairing is required only if you want to use a different Bluetooth Smart compatible heart
rate sensor.
3.24.1. Pairing PODs and HR sensors
Pairing procedures may vary depending on the POD or heart rate (HR) sensor type. Please
refer to the user guide for the device you are pairing with your Suunto Ambit3 Peak before
continuing.
To pair a POD or heart rate sensor:
1. Activate the POD or heart rate sensor. If you are pairing a Suunto Smart Sensor, see 3.11.2.
Putting on Suunto Smart Sensor.
2. Keep [Next] pressed to enter the options menu.
3. Scroll to PAIR with [Light Lock] and select with [Next] .
4. Scroll the options with [Start Stop] and [Light Lock] and press [Next] to select a POD or
heart rate sensor to pair.
5. Hold your Suunto Ambit3 Peak close to the device you are pairing and wait for Suunto
Ambit3 Peakto notify that pairing was successful. If the pairing fails, press [Start Stop] to
retry, or [Light Lock] to return to the pairing setting.
2.
20.9
16:30
Tuesday
5.
PAIR
[...............]
Bike POD 1
[...............]
3.
[...............]
2s
PAIR
[...............]
6.
Hold belt
next to
device
Ⓡ
Smart compatible bike, foot and Power PODs
4.
PAIR
[...............]
Bike PODs
[...............]
35
Advertisement
Table of Contents
