Track Back - Suunto AMBIT3 RUN 2.0 User Manual

Table of Contents

Advertisement

NOTE: GPS timekeeping corrects the time accurately, if it is less
than 7.5 minutes wrong. If the time is wrong more than that, GPS
timekeeping corrects it to the closest 15 minutes.
GPS timekeeping is activated by default. To deactivate it:
1. In the options menu, go to GENERAL, then to Time/date and GPS
timekeeping.
2. Set the GPS timekeeping on or off with [Start Stop] and [Light
Lock]. Accept with [Next].
3. Go back to the settings with [Back Lap], or keep [Next] pressed
to exit.

3.33 Track back

With Track back, you can retrace your route at any point during an
exercise. Suunto Ambit3 Run creates temporary waypoints to guide
you back to your starting point.
To track back during exercise:
1. While you are in a sport mode that uses GPS, keep [Next] pressed
to access the options menu.
2. Press [Next] to select NAVIGATION.
3. Scroll to Track back with [Start Stop] and select with [Next].
You can now start navigating your way back the same way as
during route navigation. For more information about route
navigation, see
Track back can also be used from the logbook with exercises that
include GPS data. Follow the same procedure as in
3.25.1 Navigating a route .
95

Advertisement

Table of Contents
loading

Table of Contents