Adding Your Location As A Poi - Suunto AMBIT3 RUN 2.0 User Manual

2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Press [Next] to select Location.
4. Press [Next] to select Current.
5. The watch starts searching for a GPS signal and displays GPS
found after acquiring the signal. After that your current
coordinates are shown on the display.
TIP: You can also check your location while you are recording an
exercise by keeping [Next] pressed to access the options menu.

3.23.2 Adding your location as a POI

Suunto Ambit3 Run allows you to save your current location or
define a location as a POI. You can navigate to a saved POI anytime,
for example, during your exercise.
You can store up to 250 POIs in the watch. Note that also routes
take up this quota. For example, if you have a route with 60
waypoints, you can additionally store 190 POIs in the watch.
You can select a POI type (icon) and POI name from a pre-defined
list, or freely name the POIs in Movescount.
To save a location as a POI:
1. Enter a sport mode that has GPS activated and keep [Next]
pressed to access the options menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Press [Next] to select Location.
4. Select CURRENT or DEFINE to manually change longitude and
latitude values.
66