Putting On Suunto Smart Sensor - Suunto AMBIT3 RUN 2.0 User Manual

3.9.2 Putting on Suunto Smart Sensor

To start using the Suunto Smart Sensor:
1. Snap the sensor firmly into the strap connector.
2. Adjust the strap length as needed.
3. Moisten the strap electrode areas with water or electrode gel.
4. Put the strap on so that it fits snugly and the Suunto logo is
facing up.
1. 3. - 4.
SUUNTO
SUUNTO
SUUNTO
The Smart Sensor turns on automatically when it detects a heart
beat.
TIP: Wear the strap against your bare skin for best results.
28