Intended Use; Telephone Type; Speakerphone Quality And Display Legibility; Single-Line Telephone/Multi-Line Telephone - Siemens Hipath 4000 Operation Manual

General Information

Intended use

The OpenStage phone is a desktop unit designed for voice transmission
and for connection to the LAN. Any other use is regarded as unauthorized.

Telephone type

The identification details (exact product designation and serial number) of
your telephone can be found on the nameplate on the underside of the
base unit. Specific details concerning your communications platform can
be obtained from your service technician.
Please have this information ready when you contact our service depart-
ment regarding faults or problems with the product.

Speakerphone quality and display legibility

•
•

Single-line telephone/multi-line telephone

Your OpenStage 60/80 is a "multi-line telephone". This means that your ser-
vice personnel can configure multiple lines on your phone, which is not the
case with single-line phones. Each line is assigned an individual phone
number which you can use to make and receive calls.
The programmable sensor keys function as line keys on multi-line phones
page 114.
When using a multi-line phone to make and receive calls, certain particu-
lars must be taken into account

Executive-secretary functions

The executive-secretary configuration is a special case. This is a multi-line
telephone with special features (e.g. "Call transfer to exec", "Call pickup"
and "Representative"), configured especially for executive-secretary use
page 130 ff.
12
To ensure good speakerphone quality, the area in front of the telephone
(front right) should be kept clear.
The optimum handsfree distance is 20 in. (50 cm).
Proceed as follows to optimize display legibility:
Turn the phone to tilt the display. This ensures you have a frontal view
of the display while eliminating light reflexes.
– Adjust the contrast as required page 135.
page 114 ff.