Call Forwarding; Overview Of Forwarding Types - Siemens Hipath 4000 Operation Manual

Step by step

Call forwarding

If your belongs to an ONS group (parallel call
page 146), please note the following:
Call forwarding can be configured on any phone
in the ONS group and will then apply to all
phones in that ONS group.
Call forwarding between two phones in an ONS
group is not possible.

Overview of forwarding types

You have two options for programming call forwarding
on your station:
• Configuring using the service menu
• Configuring using the call forwarding
key page 48
The entries in the relevant menus correspond as ex-
plained in the following table:
Service menu
FWD-VAR-ALL-BOTH on
All calls are forwarded, the saved phone number is de-
leted after deactivation.
FWD-FIXED on
All calls are forwarded, the saved phone number is
not deleted after deactivation.
FWD-VAR-ALL-INT on
Only internal calls are forwarded.
FWD-VAR-ALL-EXT on
Only external calls are forwarded.
FWD-VAR-BUSY-BOTH on
If your station is busy, all calls are forwarded.
FWD-VAR-RNA-BOTH on
If you do not answer a call, all calls are forwarded
ter a certain length of time.
FWD-VAR-BZ/NA-BTH on
If your station is busy or you do not answer a call, all
calls are forwarded after a certain length of time
[1] This duration is defined by your service personnel.
Apart from "Call forwarding for internal" and "Call for-
warding for external", the call forwarding types preclude
each other. For the two exceptions, you can program
and activate one call forwarding destination.
Making Calls – Basic Functions
page 50
Forwarding key
All calls
Fixed
Internal
External
Busy
No reply
Busy/no answer
[1]
af-
1
.
47