System-Wide Speaker Call - Siemens Hipath 4000 Operation Manual

Step by step
n

System-wide speaker call

You can place a speaker call from your phone to any in-
ternal party with a telephone equipped with speaker-
phone mode or a loudspeaker.
Speaker call to a variable destination
Prerequisite: You have programmed the function
"Speaker call-one-way" on a key
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
S
Press the "Spkr. 1-way" sensor key.
j
Enter the internal number of the party.
A connection is immediately established to this destina-
tion station's loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Speaker call protect" is not activated
Z
The caller hears a confirmation tone when the connec-
tion is established and they are free to start speaking.
^
The called party can accept the connection by lifting the
handset.
S
or If the called party presses the speaker key or the line
key (if configured), the connection is lost.
The same number of speaker calls and normal
connections is possible.
Speaker call to a fixed destination
Prerequisite: The system code for "Speaker call-one-
way" and the destination number are programmed on
the repdial key
S
Press the programmable repdial key. A connection to
the destination loudspeaker is immediately established.
Making Calls – Convenience Functions
page 83.
page 88.
73