Intended Use; Telephone Type; Speakerphone Quality And Display Legibility; Single-Line Telephone / Multi-Line Telephone - Siemens OpenStage 60 User Manual

General information

Intended use

The OpenStage phone is a desktop unit designed for voice transmission
and for connection to the LAN. It can also be used as a workstation device.
Any other use is regarded as unauthorized.

Telephone type

The identification details (exact product designation and the serial number)
of your telephone can be found on the nameplate on the rear of the base
unit. Specific details concerning your communications platform can be ob-
tained from your service technician.
Please have this information ready when you contact our service depart-
ment regarding faults or problems with the product.

Speakerphone quality and display legibility

•
•

Single-line telephone / multi-line telephone

Your OpenStage 60/80 is a multi-line telephone. This means that multiple
lines can be configured on your Openstage 60/80, which is not the case
with single-line phones. Each line is assigned an individual phone number
which you can use to make and receive calls.
The programmable sensor keys function as line keys on multi-line phones
page 16.
The "Line overview" tab on the telephony interface provides information
about the lines configured on your phone and the current status of each
line
When using a multi-line phone to make and receive calls, certain particu-
larities must be taken into account
10
To ensure good speakerphone quality, the area in front of the telephone
(front right) should be kept clear.
The optimum handsfree distance is 20 in (50 cm).
Proceed as follows to optimize display legibility:
– Turn the phone to tilt the display. This ensures you have a frontal view
of the display while eliminating light reflexes.
– Adjust the contrast as required
page 26.
page 111.
page 71.