Switching To Speakerphone Mode; Switching To The Handset - Siemens Hipath 4000 Operation Manual

Step by step
if nec.
if nec.
Suggestions for using speakerphone mode:
• Tell the other party that speakerphone mode is ac-
tive.
• Adjust the call volume while speakerphone mode is
active.
• The ideal distance between the user and the phone
in speakerphone mode is 50 cm.

Switching to speakerphone mode

Prerequisite: You are conducting a call via the handset.
n ]
Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
X
Set the call volume.
US mode
If your communication system is set to US mode (con-
tact your service personnel), you do not have to hold
down the speaker key when replacing the handset
when switching to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
X
Set the call volume.

Switching to the handset

Prerequisite: You are conducting a call in speaker-
phone mode.
^
Lift the handset.
n
The key shown goes out.
Making Calls – Basic Functions
41