Panasonic KX-TVP150 User Manual page 72

34 0
Keyboard Operations
.3.
Auto. Attn.
Setting
- 1. Department Dialing Department dialing No.
-2. Call Queuing Announcement
Mode
-3. Operator's
Parameters -Operator 1 - - Operator Service, Operator's
Operator 3
Extension, Operator's Mail-
box No., Operator No-answer
Time, Busy Coverage Mode,
No-answer Coverage Mode,
Message Repeat Cycle
- 4. Call Hold Retrieval Settings Call retrieval announcement timing, Redialing
cancel timing.
- 5. Alternate Transfer Sequence
Enter & Delete Extension No. in the list, set
Alternate Transfer Sequence, Extension Group
listing.
4. Hardware
E
1. RS232C Baud rate, Word bit length, Parity, Stop bit
Settings length.
2. Port Setting
Port 1 - Port 8 - Flash time, CPC signal, Dis--
connect time, Dialing mode.
3. Silence Reduction Silence reduction level, Silence recording time.
L4. PBX Interface Parameters - 1. Dialing - PBX Type, Inband Integration,
Parameters Ext. length, No. of digits to
access outside line, No-answer
time, Pause time, Outgoing call
setup sequence, Operator trans-
fer sequence, Ext. transfer
sequence, Reconnect sequence
on busy, Reconnect sequence on
no-answer, Reconnect Sequence
on Refuse Call, Light-on/off
Sequence for Message Waiting
Lamp, Call Waiting Sequence,
Release Sequence for Call Wait-
ing
-2. Inband
- Ringback, Busy, Reorder, DND,
Signaling Answer, Forward to VM Ring-
ing, Forward to VM Busy, For-
ward to Other Extension
Confirmation, Disconnect
-5. Custom -Menu Repeat Cycle, Call Transfer Anytime, Wait for Second Digit, No DTMF
Service
Input Operation, Keypad Assignment
Settings
Manager's Guide
System Administrator
M-3-29
(1292-G)