Panasonic KX-TVP150 User Manual page 292

5.10 Setting Message Waiting
Notification
9
Enter the telephone number to be called.
You will hear the prompt:
.
This telephone number is -.
To change the telephone number, press [I J.
To accept, press [2].
To review, press [3].
To add more digits to the telephone number, press [4].
To insert a pause, press [S].
To set dial mode, press [6].
To insert a wait for dial tone, press [7].
ABC lo
cl Press [2] to accept the number.
2
5.10.5
Specifying the Notification Method
The Message Manager choosing notification by direct call
can specify a telephone or a pocket beeper as the destina-
tion for notification calls. If the destination is a telephone,
the VPS will call, play a message stating that there are
messages waiting, prompt the Message Manager to enter
his or her password and, once the password has been
entered correctly, play the messages in the mailbox. If the
destination is a pocket beeper, the VPS will call and termi-
nate processing. However, if the Message Manager has not
retrieved his or her messages within 30 minutes, the system
will call the beeper once again. This process is repeated
seven times or until the messages are retrieved.
To specify the notification
method:
1 -9
Same as Setting the Telephone Number to be Called.
ABC 10
cl
Press [2] to accept the number.
,
2
M-5-74
(1292-G)
Message Manager
Manager's Guide