Avaya 4600 Series Administrator's Manual page 82

4600 Series IP Telephone LAN Administrator's Guide
endptNVHUBSTAT OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "NVM Hub flag. This variable returns 0 if the
endpoint's secondary Ethernet interface parameter in
NVM is NOT enabled, else 1."
::= { endptNVM 9 }
endptNVDSCPAUD OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "NVM DSCP for audio. This variable specifies the
Differentiated Services Code Point for audio stored
in NVM (integer between 0 and 63 inclusive)."
::= { endptNVM 10 }
endptNVDSCPSIG OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION " NVM DSCP for signaling. This variable specifies
the Differentiated Services Code Point for signaling
stored in NVM (integer between 0 and 63 inclusive)."
::= { endptNVM 11 }
endptNVL2Q
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "NVM 802.1Q flag. This variable returns 0 if the
Layer 2 802.1Q framing parameter in NVM is OFF, else 1."
::= { endptNVM 12 }
Avaya - 46xx IP Telephone MIB
A-12
INTEGER
current
INTEGER
current
INTEGER
current
OBJECT-TYPE
INTEGER
current