Avaya 4600 Series Administrator's Manual page 78

4600 Series IP Telephone LAN Administrator's Guide
endptHUBSTAT
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "Hub flag. This variable returns 0 if the
endpoint's secondary Ethernet interface is currently NOT
enabled, else 1."
::= { endptID 25 }
endptDSCPAUD
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "DSCP for audio. This variable specifies the
Differentiated Services Code Point for audio currently
in use (between 0 and 63 inclusive)."
::= { endptID 26 }
endptDSCPSIG
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION " DSCP for signaling. This variable specifies the
Differentiated Services Code Point for signaling
currently in use (between 0 and 63 inclusive)."
::= { endptID 27 }
endptL2Q OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "802.1Q flag. This variable returns 0 if the Layer
2 802.1Q framing parameter is currently OFF, else 1."
::= { endptID 28 }
Avaya - 46xx IP Telephone MIB
A-8
OBJECT-TYPE
INTEGER
current
OBJECT-TYPE
INTEGER
current
OBJECT-TYPE
INTEGER
current
INTEGER
current