Windows 2000 Dhcp Server - Avaya 4600 Series Administrator's Manual

Windows 2000 DHCP Server

This section describes the configuration of the DHCP server in Windows 2000.
Verifying the Installation of the DHCP Server
Use the following procedure to verify whether the DHCP server is installed:
1. Select Start->Program->Administrative Tools->Computer Management.
2. Under Services and Applications in the Computer Management tree, you should find DHCP.
3. If DHCP is not installed, install the DHCP server; otherwise please skip directly to
and Configuring a DHCP Scope
Creating and Configuring a DHCP Scope
Use the following procedure to create and configure a DHCP scope:
1. Select Start->Programs->Administrative Tools->DHCP.
2. In the console tree, click the DHCP server to which you wish to add the DHCP scope for the IP
telephones. Typically this will simply be the name of your DHCP server machine.
3. Select Action->New Scope from the menu.
Windows displays the New Scope Wizard to guide you through rest of the setup.
4. Click the Next button.
The Scope Name dialog box is displayed.
5. Enter a name for the scope in the Name field, such as "DEFINITY IP Telephones," and a brief
comment in the Description field.
6. Click the Next button when finished.
The IP Address Range dialog box is displayed.
7. Define the range of IP addresses used by the IP telephones listed in item
Start IP Address should be the first IP address available to the IP telephones. The End IP
Address should be the last IP address available to the IP telephones.
8. You may define the subnet mask in one of two ways:
The number of bits of an IP address to use for the network/subnet IDs.
The subnet mask IP address.
Enter only one of these values. Click the Next button when finished.
The Add Exclusions dialog box is displayed.
9. Exclude any IP addresses in the range specified in the previous step that you do not wish to
be assigned to an IP telephone.
a. Enter the first IP address in the range that you would like to exclude in the Start Address
field under Exclusion Range.
for instructions on server configuration.
Server Administration
4
4
4
7 in Table
Creating
4-2· The
DHCP
4-13