Radio Alarm - Grundig Sonoclock 54 Manual

26
SETTINGS
______________________________________________
All settings can be carried out in stand-by mode. The following sections
describe the settings for the first alarm programme » ALARM
this for the second alarm programme » ALARM
times are activated, » ALARM
the upcoming day of the week, to which the alarm setting applies appear in
the
display.

Radio alarm

Press »ON/OFF« to switch on the device.
1
Use »1/6 ... 5/10« to select the desired radio station.
2
– The requested radio station is played.
Set the desired maximum volume using
3
4 Press »ON/OFF« to switch the device to stand-by mode.
5 To activate the first alarm programme, press and hold down
– Display: e.g. » ALARM
the next alarm day.
Press »AL 1« twice to set the programme.
6
– Display: » ALARM 1
If necessary, select radio programme (»
7
Press »s«.
8
– Display: The hours of the alarm time flash.
Press »S« or »A« briefly to set the hours step-by-step or hold
9
down to run through the hours quickly.
Press »s«.
10
– Display: The minutes of the alarm time flash.
11 Press »S« or »A« briefly to set the minutes step-by-step or hold
down to run through the minutes quickly.
12 Press »s«.
– Display: » « flashes.
MON
Switch the alarm on Monday on or off with »S« or »A«.
13
– Display: »ON« or »OFF« appears and flashes.
Press »s«.
14
– Display: » « flashes.
TUE
Choose settings for all days of the week; to do so repeat steps
15
12 as often as necessary.
Press »AL 1« to confirm the settings.
16
– Display: » ALARM
next alarm day for the week.
2
«, the alarm time (e.g. »7:30«) and
1 2
»+ VOLUME
«, the alarm time (e.g. »6:00«) and
1
« flashes.
«) with »S« or »A«.
«, the alarm time (e.g. »7:00«) and the
1
«. Repeat
1
«. When both alarm
–«.
»AL 1«.
and
11