Answering A Monitored Extension's Call; Whisper Page - ShoreTel 530 User Manual

Answering a Monitored Extension's Call

In addition to the visual cues the monitored extension's icons and custom key
LED provide, you will also hear a different ring when a call comes in, and if
you're on a call, you will hear a higher pitched call waiting tone.
An incoming call for a monitored extension appears on your phone like this
(below):
Monitored
extension
Monitored
extension
name
Caller's name
Caller's number
You can pick up the call while it is ringing by pressing the custom key or by
pressing the Answer soft key. You can send it to the monitored extension's
voice mail by pressing To VM. You can also answer a call after the owner of
the monitored extension has put it on hold by pressing the Pickup soft key.
When you put a call that has come in to the monitored extension on hold, the
call is parked on the owner's phone, so that either of you may pick up the call
again.
The system administrator can configure your monitored extensions to deliver
Caller ID on inbound call, display Caller ID on active calls, turn on, turn off or
delay the ringing on inbound calls.

Whisper Page

With the appropriate permissions (set by your system administrator for both
your phone and the target phone), the Whisper Page feature lets you break
into an active call in order to speak with an internal user. This occurs without
the remote caller hearing the interruption and without you hearing the remote
caller.
To issue a Whisper Page to another user who is on a call, dial
the extension of that user. Note that the recipient must be on an IP110, IP210,
IP212k, IP230, IP530 or IP560/560g handset. If a Whisper Page call is sent to
Call
Monitored
duration
extension
, plus
43