Power-Up And Reset Operation (Dynamic Addressing Process); Initialization - Avaya one-X 9601 Installation And Maintenance Manual

9600 Series IP Deskphone Installation
2. Plug one end of the first Category 5e modular line cord into the Ethernet jack of the PC and
the other end into the secondary Ethernet jack on the 9600 Series IP Telephone,
if appropriate.
3. If the deskphone is to be IEEE-powered, plug one end of the second Category 5e
modular line cord into the Ethernet jack on the deskphone. Plug the other end of this cord
into the Ethernet wall jack. You are now finished. Do not proceed to Step 4.
4. If the deskphone is to be powered locally, connect the Category 5 modular line cord
provided with the IP Phone Single Port PoE Injector (SPPOE-xx, where xx represents the
model number) into the Ethernet jack on the phone. Plug the femite end of this cord into the
deskphone. Plug the other end of this cord into the SPPOE-xx power injector jack labeled
DATA & POWER OUT. Plug another Category 5 cord into the SPPOE-xx power injector
jack labeled DATA IN. Plug the other end of this cord into the Ethernet wall jack. Finally,
connect the SPPOE-xx to an AC power source.
Power-Up and Reset Operation (Dynamic Addressing
Process)
Note:
Before starting this process you must have an OPTIM extension number for the
Note:
SIP deskphone, the Avaya Aura Communication Manager security code
(password), and a login and password on the SES/SM server.
Any reference to the HTTP server applies equally to an HTTPS server.
The initial display messages, some of which are part of DHCP give a "power on" indication and
dynamic feedback as the telephone initializes. The intent of these messages is to reassure the
user that the phone is active and has not "locked up," and to provide useful information about
the status of network, server or downloading operations before the availability of dial tone.

Initialization

The following process describes the software architecture as well as providing a high-level
overview of how the telephone is expected to operate during startup and software upgrades.
This is by no means a comprehensive description of all of the internal tasks performed during
startup.
Files are stored in five areas of reprogrammable non-volatile (flash) memory in the deskphones:
a boot program area,
●
two Kernel/Root File Systems,
●
18 SIP Deskphones Release 6.1 Installation and Maintenance Guide