Avaya one-X 9601 Installation And Maintenance Manual page 59

Table 2: Possible Error and Status Messages During Installation of 9600 Series IP
Telephones (continued)
Message
DHCP: CONFLICT
Finding
router...
No Ethernet
Restarting...
SCEP: Failed
Subnet conflict
Updating: DO
NOT UNPLUG THE
TELEPHONE
Cause/Resolution
CAUSE: At least one of the IP Addresses offered by the DHCP server
conflicts with another address.
RESOLUTION: Review DHCP server administration to identify duplicate
IP Address(es).
CAUSE: The deskphone is proceeding through boot-up.
RESOLUTION: Allow the deskphone to continue.
CAUSE: When first plugged in (or during operation), the SIP IP
deskphone is unable to communicate with the Ethernet.
RESOLUTION: Verify the connection to the Ethernet jack, verify the jack
is Category 5, verify power is applied on the LAN to that jack, etc.
CAUSE: The deskphone is in the initial stage of rebooting.
RESOLUTION: Allow the deskphone to continue.
CAUSE: Simple Certificate Enrollment Protocol (SCEP) has rejected a
request for a certificate.
RESOLUTION: Although the SCEP server connection is terminated,
startup continues. No action required.
CAUSE: The deskphone is not on the same VLAN subnet as the router.
RESOLUTION: Administer an IP Address on the deskphone using
Static Addressing Installation, or administer network equipment to
administer the deskphone appropriately.
CAUSE: The deskphone is updating its software image.
RESOLUTION: Allow the deskphone to continue.
Installation Error and Status Messages
Issue 1 December 2010
2 of 2
59