Plugging In And Resetting The Deskphone Using The Dynamic Addressing Process; Understanding The Plug In And Reset Process - Avaya 9608 Installing And Maintaining

You can use your fingers, a flat screwdriver, or other non-sharp device to pry around the
edge of the standard faceplate.
3. Align the tabs on the 9641G Call Center faceplate with the slots on the outer edges of the
deskphone and push down to lock the tabs into the slots.
4. Ensure that the display bezel surrounding the screen is in proper position.
5. Plug the HAC cord back into the underside of the phone.
Plugging in and resetting the deskphone using the Dynamic
Addressing Process
Note:
Before you start this process you must have an extension number for the IP deskphone and
the Communication Manager security code (password) for that extension, unless you intend to
use the deskphone with unnamed registration. For more information, see
registration on page 33. Any reference to the HTTP server applies equally to an HTTPS
server. You can run the plug in and reset process successfully using the following description.
As the deskphone initializes, you see messages, some of which are part of DHCP process, with a
power on indication and dynamic feedback. These messages indicate that the phone is active and
not locked. You also receive useful information, about the status of the network, the server, or the
downloading operations, before the dial tone.

Understanding the plug in and reset process

Plug the phone into the Ethernet wall jack. The phone receives power from the port and performs
the following processes:
Note:
Do not unplug the phone during the download process. Wait for the download process to
complete. If the application was downloaded earlier, the whole process takes approximately 1
to 2 minutes after the phone is plugged in. For software upgrades, including the boot file and
application file download, the process might take 5 to 10 minutes. The duration depends on
factors such as LAN loading and the number of phones being installed.
During hardware initialization, the system initialization values NVCONTRAST and
NVBRIGHTNESS are checked for non-null values, and set accordingly. phones with bit-mapped
display screens show the Avaya IP phone name and logo.
1. The system checks the system initialization value for the language file in use
(NVLANGFILE) for a non-null value, in which case the text strings in that language file are
used for text display. Otherwise, the display shows English text strings.
2. The boot programs check the Kernel or the Root File System that has previously been
marked as the one to be activated to ensure that it has not become corrupted. If the Kernel
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323
Comments on this document? infodev@avaya.com
Installing the Deskphone
About unnamed
29