Avaya one-X 9601 Installation And Maintenance Manual page 41

Use the following procedure to enable or disable logging of system events.
1. When you select LOG from the Admin Procedures Screen, the deskphone prompts you to
use the Right and Left navigation arrows to select and change a setting and displays the
following text:
Log:
Log Categories...
Remote Logging
Remote Log Server
where the text string is the wording associated with the current system value of
SYSLOG_ENABLED (1 = Enabled; 0 = Disabled) and SYSLOG_LEVEL, defined as:
"Emergencies" when SYSLOG_LEVEL = 0
●
"Alerts" when SYSLOG_LEVEL = 1
●
"Critical" when SYSLOG_LEVEL = 2
●
"Errors" when SYSLOG_LEVEL = 3
●
"Warning" when SYSLOG_LEVEL = 4
●
"Notices" when SYSLOG_LEVEL = 5
●
"Information" when SYSLOG_LEVEL= 6
●
"Debug" when SYSLOG_LEVEL = 7
●
2. To change the Log or Remote Logging Enabled setting, press the Right (or Left)
navigation arrow to cycle through the valid settings. When changing the Remote Log Server
value, enter the IP Address to which syslog messages should be sent.
When changing the Log value, depending on the current value, the next sequential text
string or value is selected and displayed as the setting. For example, if the current value is
Alerts (1), pressing the Right navigation arrow changes the value to Critical (2). If the
current value is Debug (7), pressing the Right navigation arrow changes the value to
Emergencies (0).
3. Press Save to store the new setting and redisplay the Admin Procedures screen.
Choice Selector Bar for the
SYSLOG_LEVEL value defined below.
Use only when directed to do so by
Avaya Services.
on/off
nnn.nnn.nnn.nnn
Disable/Enable Event Logging
Issue 1 December 2010 41