Heat & Glo SUPREME-N-I30AU Owner's Manual page 31

NOTE: Any 3 in. (76 mm)
section of flex pipe must
be enclosed to existing
fireplace flue in double
lined flue to comply with
AS2918-2001 and the building
code of Australia.
MAXIMUM
TOTAL FLUE
RUN 40 ft.
(12 m)
MINIMUM TOTAL
FLEXIBLE FLUE
RUN 35-7/16 ft
(900 mm)

Seal connection points for ducting.
Figure 8.14 Optional SLP Venting Confi guration - Vertical Termination
Heat & Glo • Supreme-N-I30AU, Supreme-P-I30AU • 2222-900 Rev. X • 6/14
SLP-TVHW
Must adhere to pipe clearances.
SLP 170 Ø
TWIN SKIN FLUE
Colinear to Coaxial Adapter
LINK ADAPTER
CHIMNEY PLATE
(MADE TO ORDER)
FLEXIBLE FLUE
MINIMUM 1/4 in. (6 mm)
NON-COMBUSTIBLE BASE (UNDER UNI
31