Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITORONDENS 200-T Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
Commissioning steps
Inspection steps
Maintenance steps
•
1. Filling the heating system..............................................
•
2. Vent the boiler at the safety equipment block
(accessory)......................................................................
•
3. Venting the heating system
• •
4. Shutting down the system
• •
5. Draining the heating system (if required).....................
• •
6. Opening the boiler door.................................................
• •
7. Cleaning the heating surfaces....................................... 10
• •
8. Checking gaskets and thermal insulation
components.................................................................... 12
•
9. Fitting the boiler door..................................................... 12
• •
10. Separating the neutralising system or active charcoal
filter (if installed) from the boiler and connecting the
drain hose........................................................................ 13
• •
11. Checking the neutralising system (if installed)........... 13
• •
12. Checking the active charcoal filter (if installed).......... 14
• •
13. Checking the connections on the flue gas side for
tightness.......................................................................... 14
• •
14. Cleaning the condensate drain pipe and siphon and
reconnecting to the drain............................................... 15
•
15. Filling the siphon and neutralising system
(accessory) with water................................................... 15
• • •
16. Checking connections on the heating water and DHW
sides and the sensor well for leaks
• • •
17. Checking the function of the safety equipment
• •
18. Checking the diaphragm expansion vessel and
system pressure............................................................. 16
• • •
19. Checking the thermal insulation for firm seating

Commissioning, inspection, maintenance

Page
7
8
9
9
5