What You Can Do; What You Need To Know; Navigation Panel; Network Map - ZyXEL Communications NBG6503 User Manual

6.2 What You Can Do

You can do the following in this mode:
• Use this Navigation Panel
• Use the Network Map screen
gateway and whether it is connected to the Internet.
• Use the Control Panel
wireless security, wireless scheduling and bandwidth management and so on.
• Use the Status Screen screen
NBG, including the WAN IP, MAC Address of the NBG and the firmware version.
• Use the Pop Up Menu to refresh the Router or run the eaZy123 wizard
21).

6.3 What You Need to Know

Between the different device modes, the Control Panel
on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
• Access Point Mode: Only Power Saving and Wireless Security are available.

6.4 Navigation Panel

Use this navigation panel to opt out of the Easy mode.
Figure 30 Navigation Panel
The following table describes the labels in this screen.
Table 18 Navigation Panel
ITEM
Home
Expert Mode
Logout

6.5 Network Map

Note: The Network MAP is viewable by Windows XP (need to install patch), Windows
Vista and Windows 7 users only. For Windows XP (Service Pack 2) users, you can
see the network devices connected to the NBG by downloading the LLTD (Link
Layer Topology Discovery) patch from the Microsoft Website.
Chapter 6 Easy Mode
(Section 6.4 on page
(Section 6.5 on page
(Section 6.6 on page
(Section 6.7 on page
DESCRIPTION
Click this to go to the Login page.
Click this to change to Expert mode and customize features of the NBG.
Click this to end the Web Configurator session.
NBG6503 User's Guide
46) to opt out of the Easy mode.
46) to check if your NBG can ping the
47) to configure and enable NBG features, including
53) to view read-only information about the
(Section 6.6 on page
46
(Section 2.2 on page
47) changes depending