ZyXEL Communications NBG6503 User Manual page 88

Figure 66 Network > Wireless LAN 2.4G/5G > Advanced
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN 2.4G/5G > Advanced
LABEL DESCRIPTION
RTS/CTS Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
Threshold (Clear To Send) handshake.
Fragmentation The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
Threshold the maximum data fragment size that can be sent. Enter an even number.
Enable Intra- A Basic Service Set (BSS) exists when all communications between wireless clients or
BSS Traffic between a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled,
wireless client A and B can access the wired network and communicate with each other.
When Intra-BSS is disabled, wireless client A and B can still access the wired network but
cannot communicate with each other.
Output Power Set the output power of the NBG in this field. If there is a high density of APs in an area,
decrease the output power of the NBG to reduce interference with other APs. Select one of
the following 100%, 90%, 75%, 50%, 25%, 10% or Minimum. See the product
specifications for more information on your NBG's output power.
Network Mode Select 11b/g mixed mode to allow IEEE802.11b and IEEE802.11g compliant WLAN devices
(Wireless LAN to associate with the NBG.
2.4G)
Select 11b only to allow only IEEE 802.11b compliant WLAN devices to associate with the
NBG.
Select 11g only to allow only IEEE 802.11g compliant WLAN devices to associate with the
NBG.
Select 11n only to allow only IEEE 802.11n compliant WLAN devices to associate with the
NBG.
Select 11b/g/n mixed mode to allow IEEE802.11b, IEEE802.11g and IEEE802.11n
compliant WLAN devices to associate with the NBG.
Network Mode Select 11a/n mixed mode to allow IEEE802.11a and IEEE802.11n compliant WLAN devices
(Wireless LAN to associate with the NBG.
5G)
Select 11a only to allow only IEEE 802.11a compliant WLAN devices to associate with the
NBG.
Select 11a/an/ac to allow only IEEE 802.11a, IEEE802.11an and IEEE802.11ac compliant
WLAN devices to associate with the NBG.
Chapter 10 Wireless LAN
NBG6503 User's Guide
88