Table of Contents
Advertisement
Test Menu Item
ONLINE HEX PRT
CANCEL HEX PRT
CX HEX PRT
CANCEL CX PRT
TX HEX PRT
CANCEL TX PRT
|
|
RESET IPDS FONTS
|
|
|
|
|
|
|
|
|
Reset Menu
Reset Menu Item
RESET PRINTER
Description
ONLINE HEX PRINT prints a hexadecimal dump for troubleshooting purposes. Use
this option for PostScript or PCL jobs sent over the parallel, Ethernet, or token-ring
attachments. After you select this item, it changes to CANCEL HEX PRT. To cancel the
dump, select CANCEL HEX PRT.
Note: Do not use ONLINE HEX PRT for IPDS jobs.
CX HEX PRT prints a hexadecimal dump for troubleshooting problems with non-IPDS
jobs sent over the coax attachment. After you select this item, it changes to CANCEL
CX PRT. To cancel the dump, select CANCEL CX PRT.
Note: Do not use CX HEX PRT for IPDS jobs.
TX HEX PRT prints a hexadecimal dump for troubleshooting problems with non-IPDS
jobs sent over the twinax attachment. After you select this item, it changes to CANCEL
TX PRT. To cancel the dump, select CANCEL TX PRT.
Note: Do not use TX HEX PRT for IPDS jobs.
Purges all IPDS captured fonts. This item is available only when IPDS is installed and
is inactive.
Note: This item is intended for use only after the following error message:
854 IPDS DATABASE ERROR
If you get this error, do the following:
1. Power off the printer, wait 20 seconds, and then power on the printer.
2. Select RESET IPDS FONTS from the Test Menu.
3. Power off the printer again, wait 20 seconds, and then power on the printer.
Use the Reset Menu to cancel print jobs or to restore printer settings to the factory
defaults.
Notes:
1. To perform the action associated with the menu item you select, press the Enter
key.
2. If you are unfamiliar with using the operator panel to work with menus, please
read "Using the Operator Panel Keys" on page 16 and "Navigating Menus" on
page 17 before continuing.
Description
Cancels the current print job.
Notes:
1. Before you use RESET PRINTER, try canceling the job from the operator panel.
a. Press the Online key.
b. Press the Cancel Print key. The current job will be canceled and removed
from the queue after the printer completes the pages in the buffer.
c. To restore the printer to READY status, press the Online key again.
2. RESET PRINTER is not available while you print over the twinax or coax
attachments, or when you print IPDS jobs.
Chapter 6. Operator Panel Menus
67
Advertisement
Table of Contents
