Checking The Power Cord - IBM InfoPrint 20 User Manual

Checking the Power Cord

IBM recommends checking the printer plug approximately once a month.
1. Power off the printer.
2. Unplug the power cord from the printer and the wall socket.
3. Check the plugs of the power cord for heat damage, rust, bent prongs or other
damage.
4. Verify that the plug and AC outlet are free of accumulated dust.
5. Check the power cord for cracks, tears, abrasion or other damage.
6. Plug the power cord firmly into the wall socket.
7. Plug the power cord firmly into the AC outlet.
Note: Always make sure you leave enough room around all power plugs for you to
easily disconnect the printer power cord.
111
Chapter 7. Maintaining the Printer