Table of Contents
Advertisement
Use this menu
COAX SETUP MENU
TWINAX SETUP MENU
COAX DSC/DSE MENU
MACHINE INFO MENU
LANGUAGE MENU
Test Menu
Test Menu Item
CONFIG PAGE
PRINT PS FONTS
PRINT PCL FONTS
PRINT PCL DEMO
CONTINUOUS TEST
PRINT TR CONFIG
PRINT EN CONFIG
PRINT IPDS FONTS
PRINT SCS CHARS
|
FORMAT DISK
|
|
66
InfoPrint 20: User's Guide -- Web Version
To do this
Configure the coax attachment.
Configure the twinax attachment.
Define how the printer handles DSC/DSE jobs sent through the coax
attachment.
Displays page counts, the error log, and the toner and fuser usage
counters.
Define the language the printer uses to display operator panel
messages and menus.
Use the Test Menu to display basic information about the printer and to perform
basic troubleshooting tasks.
Notes:
1. To perform the action associated with the menu item you select, press the Enter
key.
2. The actual menu items you see depend on what options you have installed. To
find out what options you have installed, print a printer configuration page. See
"Printing the Printer Configuration Page" on page 18.
3. If you are unfamiliar with using the operator panel to work with menus, please
read "Using the Operator Panel Keys" on page 16 and "Navigating Menus" on
page 17 before continuing.
4. If you see the message WAIT FOR IDLE PRINTER while performing a Test
Menu item, wait until you see the READY prompt and try again. If the PCL
Menu item AUTO RESET is set to OFF, you may not get the READY prompt
even if you see the WAIT FOR IDLE PRINTER message. In this case, set
AUTO RESET to ON to restore Test Menu functions.
Description
Prints the printer configuration page. Make sure Letter or A4 paper is loaded in the
default tray. See "Selecting The Default Input Tray" on page 48 for more information.
Prints a list of PostScript fonts installed on the printer. See "Printing a List of
PostScript Fonts" on page 22 for more information.
Prints a list of PCL5e fonts installed on the printer. See "Printing a List of PCL5e
Fonts" on page 22 for more information.
Prints the demo page.
Prints continuous test pages. To stop the test, press the Cancel Print key.
Prints a configuration page for the token-ring network interface card. See "Printing the
Token-Ring Network Interface Card Configuration Page" on page 21 for more
information.
Prints a configuration page for the Ethernet network interface card. See "Printing the
Ethernet Network Interface Card Configuration Page" on page 21 for more information.
Prints a list of IPDS fonts installed on the printer.
Prints the SCS code page (character set).
Formats the optional hard drive.
Note: If you have a pre-loaded IPDS DBCS (double-byte character set) hard drive, do
not use FORMAT DISK or you will erase the pre-loaded data.
See page
95
96
98
99
100
Advertisement
Table of Contents
