Trap Setting; Password Setting - TRENDnet TEG-448WS User Manual

Trap Setting

The Trap Setting enables the device to monitor the Trap through the
Web Management Utility, set the Trap IP Address of the manager
where the trap to be sent.
Figure 26. Trap Setting
System Events: Monitoring the system's trap.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when the wrong password credentials are
entered; it will record the user's IP information.
Fiber Port Events: Monitoring the Fiber port status.
Figure 25
31
Link Up/Link Down: a trap when there is linking status activity on
the fiber port.
Abnormal* Receive Error: a trap when there are data receiving
errors on the fiber port.
Abnormal* Transmit Error: a trap when there are data
transmission errors on the fiber port.
Twisted Pair Port Events: Monitoring the twisted pair port status.
Abnormal* Receive Error: a trap when there are data receiving
errors on the copper Ethernet port.
Abnormal* Transmit Error: a trap when there are data
transmission errors on the copper Ethernet port.
Abnormal*: 50 error packet count within 10 seconds.

Password Setting

Password is an invaluable tool for the manager to secure access to the
Web Management Switch. Use this option to change the password.
The default password is "admin".
If you forget the password, press the "Reset" button on the front of the
Switch.
Figure 27. Set Password
32