Broadcast Storm Control Setting; Jumbo Frame Setting; Configure System Settings; System Information - TRENDnet TEG-448WS User Manual

Broadcast Storm Control Setting

Click Enabled to enable Broadcast Storm Control Setting.
threshold can be set to one of the following Threshold levels (in bytes
per second): 0, 8,000, 32,000, 64,000, 128,000, 256,000, 512,000,
1,024,000, 2,048,000, 2,096,000.

Jumbo Frame Setting

.
Click Enabled to enable Jumbo Frames

Configure System Settings

There are 9 options; System Information, System Setting, Trap Setting,
Password Setting, Statistics, Factory Reset, Backup Setting, Firmware
Upgrade
Figure 22
Figure 23
29

System Information

This section displays the following information; Product Name,
Firmware Version, Protocol Version, MAC Address, System Name,
Location Name, IP Address, Subnet Mask, Default Gateway, Trap IP,
Login Timeout (minutes), and System Up Time.
Press "Refresh" when you need to renew the system information.
The

System Setting

The System Setting allows you to configure the following: System
Name, Location Name, Login Timeout, IP Address, Subnet Mask and
Gateway. Through the Web Management Utility, you can easily
recognize the device by using System Name and the Location Name.
Login Timeout allows the user to set the idle time-out. The user must
login to the Web Smart Utility once the idle time-out has expired.
Figure 24
30