Device Setting; Toolbar - TRENDnet TEG-448WS User Manual

Add Item: To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.
Delete Item: To delete the device in the Monitor List.

Device Setting

Configuration Setting: In this Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name and Location.
Select the device in the Discovery list or Monitor List and click
configuration setting. The Configuration Setting window will pop out
appear (Figure 10). After making the desired changes, enter the
password and click "Set". The default password is "admin".
Figure 10. Configuration Setting
Password Change: This option allows you to change the password.
Enter the original password, the new password, confirm the password
and then press "Set".
Figure 11. Password Change
19
Firmware Upgrade: Use this option to upgrade the firmware on the
Switch.
Web Access: Double click the device in the Monitor List or select a
device in the Monitor List and click "Web Access" button to access
the Switch's Web browser configuration.

Toolbar

The toolbar in the Web Management Utility has four options; File,
View, Options and Help.
Under "File", there are four options; Monitor Save, Monitor Save As,
Monitor Load and Exit.
Monitor Save: To record the settings of the Monitor List to the
default. The next time you open the Web Management Utility,
it will load the default recorded setting.
Monitor Save As: To record the setting of the Monitor List
with a specific filename and file path.
Monitor Load: To manually load the setting file of the Monitor
List.
Exit: To exit the Web Management Utility.
Figure 12.
20