Monitor List - TRENDnet TEG-448WS User Manual

System word definitions in the Discovery List:
MAC Address: Shows the MAC Address of the Switch.
IP Address: Shows the current IP address of the Switch.
Protocol version: Shows the version of the Utility protocol.
Product Name: Shows the product name of the Switch.
System Name: Shows the system name of the Switch.
Location: Shows the location of the Switch.
Trap IP: Shows the IP where the Trap is to be sent.
Subnet Mask: Shows the Subnet Mask.
Gateway: Shows the Gateway.

Monitor List

All the switches in the Monitor List can be monitored; you can also
monitor traps and show the status of the device.
System word definitions in the Monitor List:
S: Shows the system symbol of the Switch.
is not connected.
IP Address: Shows the current IP address of the device.
MAC Address: Shows the MAC Address of the Switch.
Protocol version: Shows the version of the Utility protocol.
Product Name: Shows the product name of the Switch.
System Name: Shows the system name of the Switch.
Location: Shows where the device is located.
Trap IP: Shows the IP where the Trap is to be sent.
means the Switch
17
Subnet Mask: Shows the Subnet Mask.
Gateway: Shows the Gateway.
View Trap: The Trap function allows you to monitor events that
occur with the Switches in the Monitor List.
There is an LED indicator next to the "View Trap" button. When the
LED is green, it means that there is no trap transmitted. When the
LED is red, it means a new trap has been transmitted. (Figure 8)
When "View Trap" is clicked, a Trap Information window will appear.
This window will show the trap information including the Symbol,
Time, Device IP and the Event. (Figure 9)
The symbol " " indicates a new Event has occurred. This symbol
will disappear after you review and click on the event record.
Note: In order to receive Trap information, the Switch has to be configured
with Trap IP and Trap Events in the Web browser. See Page 31 for more
details.
Figure 8.
Figure 9.
18