Configuration; Installing The Web Management Utility; Discovery List - TRENDnet TEG-448WS User Manual

CONFIGURATION

You can configure the Switch settings such as VLAN, Trunking,
QoS... etc using the Web Browser.
The Web Management Utility allows the user to easily discover the
Web Management Switch, assign the IP Address, change the
password and upgrade firmware.

Installing the Web Management Utility

The following are step-by-step instructions for installing the Web
Management utility.
1. Insert the Utility CD in the CD-ROM Drive.
2. Click Install Utility icon to start
3. Follow the on-screen instructions to install the utility.
15
4. Upon completion, go to Program Files ->
web_management_utility and open the Web Management utility.
(Figure 7.)
Figure 7. Web Management Utility
The Web Management Utility is divided into four sections, Discovery
List, Monitor List, Device Setting and Toolbar function, for details
instruction, follow the below section.

Discovery List

This list shows all the Web management devices in the network.
Click "Discovery" button to list all the Web Management devices in
the discovery list.
Double click or press "Add to monitor list" to select add a device to
the Monitor List.
16