Table of Contents
Advertisement
TRENDnet User's Guide
Internet: The Internet icon displays green to indicate that your router
has successfully established an Internet connection. The Internet icon
displays orange to indicate that a physical connection has been
established on the Internet port of the router but with no successful
Internet connection has been established. The Internet icon displays
red to indicate that the Internet is physically disconnected.
Guest Network: The Guest Network icon displays orange to indicate
that there are no wireless guest networks currently enabled. The
Guest Network icon will display green to indicate that you have at
least one wireless guest network currently enabled.
USB: The USB icon displays orange to indicate that there are no USB
devices connect to the USB port(s). The USB icon displays green to
indicate that are USB devices connected to the USB port(s).
Wireless: The wireless icon displays green to indicate that wireless is
enabled on both 2.4GHz and 5GHz bands. The wireless icon displays
orange to indicate that only wireless band is enabled (2.4GHz or
5GHz). The wireless icon will display red to indicate that wireless is
disabled on both 2.4GHz and 5GHz bands.
Wireless Security: The wireless security section will display the
current security settings configured for your wireless networks. It is
strongly recommended to enable security on your wireless networks.
Connected Devices: The connected devices section displays the list of
network devices currently connected to your router.
© Copyright 2017 TRENDnet. All Rights Reserved.
Committing your router configuration changes
Apply/Discard Changes
The router allows you to make multiple changes to the configuration and apply or
discard all the configuration changes you have made all at the same time using the
Apply/Discard Changes section in the router management page.
After you have made multiple changes in the router configuration page, you will notice
the Apply/Discard Changes counter with increase from 0 depending on the amount of
changes you have applied. If the counter is not 0, you have pending configuration
changes that will need to be applied.
Once you have completed your changes, to commit your changes to the router, you
must click on the Apply/Discard section in the router management page, and click
Apply & Reboot to commit the changes to the router. You can also click Discard to click
discard all of the changes you have configured.
IMPORTANT NOTE: If you do not apply changes under the Apply/Discard section after
you have made your router configuration changes, your router configuration changes
will not be applied.
TEW-827DRU
11
Advertisement
Table of Contents
