Table of Contents
Advertisement
3. REPLACE TONER CARTRIDGE
2
Grasping the holder of the toner cartridge, slide the
1
cartridge along the rail toward you and remove it.
- Please return the used toner cartridges to your service tech-
nician.
2
Caution
NEVER attempt to incinerate toner cartridges. This could
cause an explosion.
3
DO NOT dispose of used toner cartridges.
Your service technician will collect them.
3
Shake the new toner cartridge to the right and left 5
4
or 6 times to loosen the toner inside.
4
Pull out the seal in the direction of the arrow as
shown on the right.
5
6
7
5
Grasping the holder of the new toner cartridge, push
it along the rail fully back into the copier.
- If the toner scatters, wipe it completely off.
8
9
6
Close the covers in the order of
10
- The following message appears:
Wait adding toner
The copier automatically starts supplying toner.
11
- When the toner has finished being supplied, the touch panel
returns to the Basic menu. (It takes approx. 4 or 5 minutes
until the toner has finished being added.)
12
9-6
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
SYMBOL (Cont.)
to
.
Advertisement
Table of Contents
