Toshiba e-studio 211c Operator's Manual page 107

4. MODE MEMORY (Cont.)
4 Press the desired Memory Number key.
1
- The copy modes are stored in the selected Memory Num-
ber key.
2
- Memory Number keys where copy modes have been al-
ready stored are shown in a half-tone shaded pattern.
- The stored copy modes remain unchanged until different
copy modes are entered. (They are retained even after the
3
power switch is turned off.)
Recalling a Stored Combination of Copy Modes to Make Copies
4
1 Place paper in the drawer(s).
5
2 Place the original(s).
3 Press the PROGRAM key to enter the programme
6
menu, and press the MODE MEMORY key.
7
8
4 Press the RECALL key.
9
10
5 Press the Memory Number key where the desired
11
combination of copy modes are stored.
- Memory Number keys where copy modes have been al-
ready stored are shown in a half-tone shaded pattern.
12
6
Press the
- Copies will be made in the recalled copy modes.
6-14
USING THE SPECIAL FUNCTIONS
Page 2-4
Page 2-9
START key.